High quality DC to AC pure sine wave. (Note the EU power connections are white!)

The main control chip approves high speed and stable MCU, intelligent control, real-time monitoring, AC output frequency is more accurate, and the operation is more stable.

With bipolar SPWM drive, the sinusoidal waveform is more accurate and the inductive load capacity is stronger.

Multiple protection functions: input low voltage shutdown protection, input high voltage shutdown protection, battery high and low voltage alarm, overload protection, short circuit protection, overheating protection.

Safety isolation: input and output isolation.

UPS / Battery Charger function: UPS means uninterruptible power supply, providing a stable, uninterrupted power to the load. When the mains power is normal, the UPS supplies power to the load and also charges the battery. When the mains power is interrupted, the UPS immediately switches to battery power and continues supplying 220V AC power to the load to ensure it operates normally.

(It is recommended to use lead-acid batteries)

Nominal Power: 2500W
Surge Power: 5000W
DC Input Voltage: 12V
AC Output Voltage: 220V ~ 240V
AC Output Frequency: 50Hz
AC Output Waveform: Pure Sine
AC Input Voltage: 220V ~ 240V
AC Input Frequency: 50Hz
AC Operating Voltage: 170V ~ 265V
Charging current: 20A Maximum
Charging voltage: 14.4V ~ 14.8V
Waveform distortion: THD<3% (Linear load)
Efficiency (>90% Load): >90%
DC Input Voltage: 10.5V ~ 15V
Input Low Voltage Alarm: 10.5V ± 0.3V
Input Low Voltage Shutdown Voltage: 10V ± 0.3V
Input high voltage Shutdown Voltage: 15V ± 0.3V
No Load Current: < 0.8A
Surge Power Duration: 0.1S
Net weight: 3.81 kg
Dimensions (L x W x H): 35x24x16 cm
Battery Cable (Cross-sectional area * length): (16mm² x600mm)x2
Fan Starting Point Temperature: ≥ 45 ℃
Temperature Protection: 75 ℃

12V-230V UPS Battery Charger Switching System Inverter - 2500W / 5000W with controller